3/8 in. OD Flare x 1/2 in. MIP (3/8 in. FIP), Steel
AU2-6-8S
Configurations
PartNo | UPC | Material/Finish | Add to Supply List |
---|---|---|---|
AU2-6-8S | 026613106724 | Brass/Rough |
-
Description
BrassCraft’s steel male gas fitting connects a gas connector to an appliance gas inlet or gas supply pipe or gas ball valve. These fittings are manufactured from steel for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, a gas ball valve or the gas supply stub out. Fitting is used with 3/8 in. O.D. gas connectors for appliances with smaller BTU demands such as a standard dryer, gas log fireplace or space heaters.
- One-piece solid steel body for long lasting performance
- Use in natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixture applications
- Large wrench flats for a quick and easy installation
- Temperature rating: -40°F to 150°F
- Pressure rating: 1/2 psi maximum
- For use with CSA listed ANSI Z21.24 / CSA 6.10 and Z21.75 / CSA 6.27 flexible gas connectors
-
Resources
-
Specifications