BrassCraft’s steel female gas fitting connects a gas connector to an appliance gas inlet or gas supply pipe or gas ball valve. These fittings are manufactured from steel for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 3/8 in. O.D. gas connectors for appliances with smaller BTU demands such as a standard dryer, gas log fireplace or space heaters.

• One-piece solid steel body for long lasting performance
• Use in natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixture applications
• Large wrench flats for a quick and easy installation
• Temperature rating: -40°F to 150°F
• Pressure rating: 1/2 psi maximum
• For use with CSA listed ANSI Z21.24 / CSA 6.10 and Z21.75 / CSA 6.27 flexible gas connectors
• Large wrench flats for a quick and easy installation
• Temperature rating: -40°F to 150°F
• Pressure rating: 1/2 psi maximum
• For use with CSA listed ANSI Z21.24 / CSA 6.10 and Z21.75 / CSA 6.27 flexible gas connectors