3/8 in. MIP x 1/2 in. FIP Gas Ball Valve

BCSSL7M

Configurations

PartNo UPC Material/Finish Length Add to Supply List
BCSSL7M-12 026613142074 Stainless Steel/Black 12"
Success! The product was added to your supply list!
BCSSL7M-24 026613142081 Stainless Steel/Black 24"
Success! The product was added to your supply list!
  • Description

    BrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. Coated black to conceal the connector in decorative hearth and gas log fireplace installations.
    *Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.

    • 1/4 in. I.D. (3/8 in. O.D.) corrugated stainless steel with black corrosion resistant coating
    • Included: 3/8 in. MIP (tapped 1/8 in. FIP) steel fitting and 1/2 in. FIP inlet brass gas ball valve
    • Black coating ideal for gas log fireplaces and decorative hearths
    • Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
    • ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
    • Smooth, burnished connector ends seal with less torque, making installation easier
    • High tensile strength stainless steel is less susceptible to work hardening
    • Deep corrugations enhance flexibility and maneuverability of connector during installation
    • Gas connector is 100% leak tested
    • Approved for indoor and outdoor use
    • Temperature rating: -40°F to 150°F
    • Pressure rating: 1/2 psi maximum
    • CSA certified to ANSI Z21.24/CSA 6.10 and ANSI Z21.75/CSA 6.27
    • Designed, machined and assembled in the USA
  • Resources

« DRAG TO SPIN »