1/2 in. FIP Gas Ball Valve w/ 5/8 in. OD Female Flare EFV x 1/2 in. MIP
CSSCK4R
Configurations
PartNo | UPC | Length | Add to Supply List |
---|---|---|---|
CSSCK4R-24 P20 | 026613169309 | 24" | |
CSSCK4R-36 P20 | 026613169316 | 36" | |
CSSCK4R-48 P20 | 026613169323 | 48" | |
CSSCK4R-72 P12 | 026613169330 | 72" |
-
Description
BrassCraft’s Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.- 1/2 in. I.D. (5/8 in. O.D.) corrugated stainless steel with corrosion resistant coating
- Safety+PLUS EFV helps protect against gas fires and explosions
- 1/2 in. FIP connection to gas ball valve outlet or gas supply stub-out
- Use to install 5-burner+ gas ranges, furnaces and tankless water heaters
- Safety+PLUS EFV has no parts that can break or misalign over time for 24/7 protection
- Safety+PLUS EFV is omnidirectional and can be installed in any position - vertical or horizontal
- Safety+PLUS EFV installs like a standard gas fitting; no special tools required
- Safety+PLUS EFV is 100% factory performance tested
- ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
- Gas connector is 100% leak tested
- Approved for indoor and outdoor use
- Temperature rating: -20°F to 150°F
- Pressure rating: 1/2 psi maximum
- CSA certified to ANSI Z21.24/CSA 6.10 and ANSI Z21.75/CSA 6.27
- Designed, machined and assembled in the USA
-
Resources
-
BrassCraft Safety+PLUS Gas Connector Installation Instructions
950.72 KB • November 18, 2019 -
BrassCraft Gas Appliance Connector Flow Capacity Chart
144.28 KB • October 19, 2017 -
BrassCraft Safety+PLUS Gas Connectors Sell Sheet
1.16 MB • January 12, 2021 -
BrassCraft Gas Appliance and Water Heater Connector Catalog
14.44 MB • February 21, 2024
-